Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Roof Replacement & Installation Across Lake Worth Beach
A full roof replacement in Lake Worth Beach typically runs $14,000 to $32,000 for a standard single-family home, with coastal-spec upgrades east of Federal Highway adding 25 to 35 percent to material costs. Most jobs take 3 to 7 days once materials arrive. If your roof is failing, call us at (561) 816-5648 and we’ll come measure it within 48 hours, then hand you a written line-item quote the same day.
Lake Worth Beach homes take a beating that most Florida roofs never see. Salt air off the Atlantic and the Lagoon, direct sun on flat Mediterranean Revival rooflines, and 1940s framing that predates modern wind codes all collide here. Ed Winslow owns this company, and his name sits on every quote we write. We’d rather tell you the truth about what your roof needs than sell you a cheap spec that fails in six years.
What Roof Replacement & Installation Costs in Lake Worth Beach
Here are real numbers for the Lake Worth Beach market, based on work we’ve priced across the city:
- Asphalt shingle roof, 1,800 sq ft home: $11,000 to $18,000 standard spec; $15,000 to $24,000 coastal-spec with stainless hardware and marine flashing
- Standing seam metal roof, same footprint: $24,000 to $38,000, depending on panel gauge and fastener spec
- Flat or low-slope roof on a 1920s Mediterranean Revival: $12,000 to $22,000, plus decking repair if the original tongue-and-groove is rotted
- Roof deck enclosure with impact-rated glazing: $8,000 to $25,000+ for whole-home packages; individual large openings run $2,500 to $5,000 each
- Impact windows tied to a roof replacement: $800 to $1,500 per window installed; single-hung impact units $900 to $1,800; custom openings on older bungalows often push higher because the rough openings are non-standard
What moves the number in Lake Worth Beach specifically? Three things. First, wind zone: east of Federal Highway you’re in Exposure Category D, which demands stronger uplift connections and closer fastener spacing. Second, opening count and rough-opening weirdness: pre-1960 homes have window and door openings that don’t match any off-the-shelf size. Third, frame condition: on wood-framed bungalows, we often find rafter tails and fascia rotted from decades of salt-wicking before anyone opened the wall. You can’t quote an honest roof number until you see what’s under the sheathing.
Call (561) 816-5648 and we’ll do a free in-home measure and give you a written quote that breaks out materials, labor, permits, and disposal. No allowances, no “we’ll see when we open it up” surprises unless there’s genuine hidden rot no one could predict.
Why Winslow Windows & Doors Is Lake Worth Beach’s Preferred Roof Replacement & Installation Company
We’re not a national chain with a call center in another state. Winslow Windows & Doors is locally owned by Ed Winslow, with a published address and license number you can look up. We’ve been in business since 2011, and our crews serve Lake Worth Beach directly, scheduled from our South Florida office. A live person answers the phone 24 hours a day, seven days a week. Not a voicemail loop. Not a ticket number.
The 36500-Day Done Right Promise is the backbone of everything we install. If it’s not done right, we make it right. That’s a century-long standard of accountability, and it applies to every roof replacement and installation we do in Lake Worth Beach. Every technician who shows up at your door is background-checked and in uniform, so you know exactly who’s on your property before the truck stops.
We also answer honestly when the answer costs us a sale. If you live east of Federal Highway and someone quotes you a roof with standard zinc-plated fasteners and generic aluminum flashing, that price is fiction. It’ll fail within a decade. We’d rather quote the marine-grade spec and explain why.
Our Roof Replacement & Installation Services in Lake Worth Beach
Full Roof Replacement
We tear off and replace asphalt shingle, tile, and standing seam metal roofs across Lake Worth Beach, from the bungalows off North Lakeside Drive to the newer builds west of I-95. Every replacement starts with a framing inspection, because on pre-1960 homes the roof deck is often the weak link, not the covering. We pull permits, pass inspections, and haul away every nail and shingle tab.

Coastal-Spec Roof Upgrades
East of Federal Highway, we specify Type 316 stainless steel roof fasteners, hot-dip galvanized connectors, and marine-grade anodized aluminum flashing as standard, not upgrade. That’s a direct response to what we’ve seen: zinc-plated hardware on coastal Lake Worth Beach homes craters with white rust within 5 to 7 years. Inland, the same fastener lasts 20. The salt air decides the spec, not the schedule.

Roof Deck Enclosures with Impact-Rated Glazing
Lake Worth Beach homes with rooftop decks or second-story balconies need glazing that meets Palm Beach County impact code and handles Exposure Category D wind loads. We install impact-rated roof deck enclosures with design pressures matched to the opening, never above +/-100 PSF. Our brands include ECO Window Systems, Mr-Glass, and Therma-Tru, all authorized and warrantied through us.

Flashing and Ventilation Remediation
Ridge, hip, roof-to-wall, and pipe-boot flashing are where Lake Worth Beach roofs fail first. We replace standard aluminum with marine-grade anodized material, switch out cheap silicone caulk for polyether sealants that survive thermal expansion, and fix soffit and wall-cavity water intrusion before it rots the framing. If your roof is newer but leaking at the edges, this is usually the fix.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lake Worth Beach
We’re authorized installers for eight premium brands, including ECO Window Systems, Mr-Glass, and Therma-Tru. For Lake Worth Beach roof replacements that tie into impact glazing, we order the exact product from the manufacturer, then bench-check every unit before it goes on the truck. Custom fabrication for non-standard rough openings on older bungalows runs 4 to 6 weeks, so we sequence that into your roofing schedule so you’re not living under tarps longer than necessary.
Common Roof Replacement & Installation Problems We See in Lake Worth Beach Homes
- Corroded zinc-plated fasteners east of Federal Highway. Direct salt spray from the Atlantic and the Lagoon oxidizes standard roofing nails and screws in 5 to 7 years. The result is lifted shingles and leaks along the ridge and hips, even on roofs that aren’t that old.
- Oxidized aluminum flashing at roof-to-wall transitions. Brackish air off the Lake Worth Lagoon pits standard flashing, letting wind-driven rain into the soffit and wall cavity. By the time you see a water stain inside, the wood behind it has usually been wet for a season or two.
- Failed sealant around roof penetrations. Plumbing vents, railing posts, and skylight curbs on older bungalows are often sealed with generic silicone, which cracks within two seasons of coastal sun. We switch to polyether sealants that flex without failing.
- Rotted tongue-and-groove decking on 1920s-1950s roofs. Mediterranean Revival and Old Florida bungalow rooflines trap moisture where salt has already compromised the flashing. When we tear off, we often find decking that can’t be saved, which changes the honest quote.
On a 1940s Old Florida bungalow near the corner of North Lakeside Drive and 13th Avenue North, our crew replaced a rusted-out metal roof where standard aluminum roof-to-wall flashing had corroded through in under six years. We specified a Miami-Dade NOA-rated standing seam system with Type 316 stainless fasteners and a marine-grade anodized aluminum drip edge, then sealed every jamb and flashing joint with a polyether sealant to stop salt-air wicking. The homeowner saw the difference immediately when we showed them the old zinc-plated screws: every head was cratered with white rust. The new stainless hardware won’t rust for 30 years.
Pricing for Roof Replacement & Installation in Lake Worth Beach, FL
A typical asphalt shingle roof replacement in Lake Worth Beach runs $11,000 to $18,000. A coastal-spec version, with stainless hardware and marine flashing, runs $15,000 to $24,000. That gap is the material cost of doing it right in salt air. The cheap spec looks identical on day one. By year seven, the fasteners are scaling and the flashing is pitting, and you’re paying for a re-roof a decade before you should be. We’ll show you both line items and let you decide, but we won’t pretend they’re equal. Call (561) 816-5648 for a free in-home measure and a written quote, no trip charge inside our home county.
Florida Pays You Back
Lake Worth Beach homeowners can stack several programs to offset the cost of a coastal-spec roof replacement and impact upgrades. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation improvements. Florida exempts impact-resistant windows and doors from sales tax. The federal 25C energy credit returns 30 percent of the product cost, up to $600 per year on qualifying units. And after a wind-mitigation inspection ($75 to $150), many carriers apply windstorm-premium credits averaging around 25 percent on the windstorm portion of your policy. No guarantees, since programs and carriers set the final numbers, but these are real offsets worth checking before you budget.
One comparison worth making before you commit: impact windows versus hurricane shutters. Shutters protect during a storm but do nothing the other 364 days of the year. Impact-rated windows are permanent protection, no panels to hang at 2 a.m. while the wind picks up. We install impact glazing; we don’t sell or install shutters. But if you’re weighing the two, the permanent option is usually the better long-term play in a salt-air coastal market like Lake Worth Beach.
We Also Serve Cities Near Lake Worth Beach
Winslow Windows & Doors handles Roof Replacement & Installation across southern Palm Beach County. If you’re in Boca Raton, Deerfield Beach, Delray Beach, or Boynton Beach, we run crews there too. But if you’re reading this from Lake Worth Beach, you’re already in our backyard. Call (561) 816-5648 and you’ll reach a live person who knows exactly where your street is. Learn more about our work in your city on our Lake Worth Beach page.
Serving Lake Worth Beach, FL - Our Local Coverage Area
We’re based in the Lake Worth Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Roof Replacement & Installation in Lake Worth Beach
West of Federal Highway, standard zinc-plated fasteners are generally acceptable, but we still recommend upgrading to hot-dip galvanized or stainless at roof penetrations and ridge lines. The salt air from the Lagoon reaches further inland than most people think, especially on windy days. The material upgrade on a typical home adds a few hundred dollars and buys decades of corrosion resistance. Call (561) 816-5648 for an exact spec on your street.
Not necessarily, but the truth is many pre-1960 Lake Worth Beach homes have rotted fascia and rafter tails where old jalousie or awning windows leaked into the wall for decades. If the roof-to-wall connection is compromised, it makes sense to address it before or during the window install, not after. We’ll assess both during the free measure and tell you what actually needs doing, in what order.
If your home is a contributing structure in a historic district, the Board may require that the roof profile and visible materials stay consistent with the original character, even while you upgrade to code-compliant impact protection. That often means matching a specific tile profile or roof pitch rather than swapping in something dramatically different. We’ve worked through that process before and can put together the documentation the Board wants to see. Call (561) 816-5648 and we’ll walk you through it.
The wind mitigation inspection primarily scores roof shape, roof-to-wall attachment, and opening protection, not fastener metallurgy. But the stainless hardware and sealed flashing prevent the leaks and lifted shingles that eventually trigger a re-roof, and that protects your premiums over the long run by keeping the roof in wind-mitigated condition. The bigger credit driver is impact-rated glazing, which averages a meaningful discount on the windstorm portion of your policy after inspection.
Lifted shingles and ridge caps due to corroded fasteners. East of Federal Highway, standard zinc-plated nails lose their grip after years of salt spray, so wind that would be a non-event inland starts peeling shingles where the ridge meets the slope. We’ve seen it on roofs less than ten years old. The fix is a coastal-spec replacement with stainless fasteners and proper uplift connections. Call (561) 816-5648 for a free inspection.
Ed’s name is on the door, and on every roof we put on in Lake Worth Beach. Call (561) 816-5648 to schedule your free estimate. A neighbor you can call at 2 a.m., and someone will actually answer. We’re the one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Lake Worth Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After