Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterCWS Door Installation: The Boca Raton Owner’s Guide
If you have a CWS door that needs a new part and proper installation in Boca Raton, we carry CWS-compatible components and can usually have the work done the same week we diagnose it. Most CWS door part replacements here run between $185 and $540 installed, depending on the part and your door’s vintage. We’re an independent company, not affiliated with CWS, but we’ve been installing and repairing their doors long enough to know exactly what fits and what doesn’t.
The way most Boca Raton homeowners find us is the way you probably got here: the door was working fine for years, then one afternoon it started dragging, sticking, or making a sound it never made before. Coastal air does a number on door hardware. Salt, humidity, and daily temperature swings wear parts faster than the brochure ever admits.
Key Takeaways:
- We stock CWS-compatible parts on our trucks for the most common failures in Boca Raton
- Installed replacement typically runs $185 to $540, with written line-item pricing before we start
- Free estimates, and no trip charge if you’re in our home county
- Ed Winslow’s name is on every job, and the 36500-Day Done Right Promise backs it
Which CWS Models This Applies To
CWS has produced several door lines over the years, and the part compatibility isn’t always obvious from the outside. If your door is an older CWS Classic or CWS Estate series, the roller assemblies and track profiles are different from what you’ll find on newer CWS Architectural and CWS Impact-rated doors. Throwing an aftermarket part at the wrong series is how you end up with a door that binds two weeks later. We’ve fixed a lot of those in Boca Raton, from Mizner Park condos to single-family homes in Woodfield Country Club.
The easiest way to identify your door’s series is to check the sticker on the door slab edge, usually near the hinge side or the bottom rail. It’ll have a manufacturing code with the series prefix. If the sticker is gone, which happens after years of South Florida sun, we can identify the series by the roller wheel profile and the track throat width. For most CWS doors in this market, we recommend OEM-spec parts over generic aftermarket. The generic rollers sold at big-box stores have a smaller wheel diameter, and the difference in wear life is measured in months, not years. For hinges and handles, quality aftermarket equivalents from known manufacturers work fine, and we’ll tell you when saving money makes sense and when it doesn’t.
Signs Your CWS Door Installation Is Failing
- The door is dragging or scraping on the track. This almost always means a roller wheel has flat-spotted or the bearing has seized. In Boca Raton, the salt air accelerates the corrosion on the bearing, and once it’s rough, it grinds itself down fast.
- The door is harder to lift or slide than it used to be. That’s usually a tension or balance issue. On a CWS sliding door, the adjustable rollers may have shifted, or the springs in a hinged door may be losing tension. Pushing through it just wears the hardware faster.
- You hear a grinding or squealing sound when the door moves. A roller bearing that’s running dry is telling you it’s about to fail. Ignoring it turns a $200 roller replacement into a track repair, because the flat-spotted wheel chews up the aluminum.
- The door doesn’t latch or lock smoothly anymore. If the slab has settled or the hinges have worn, the latch won’t line up with the strike plate. That’s a security issue, not just an annoyance, especially on a CWS door that’s supposed to seal tight.
- There’s visible rust or pitting on the track or hardware. Coastal air in Boca Raton does this even to good hardware. If the track is pitted, the new rollers will never ride smooth until the track is cleaned, dressed, or replaced. We check this before quoting, because selling you rollers on a bad track would be dishonest.
Replacement Cost & What’s Included
Installed CWS door part replacement in Boca Raton generally falls into these ranges:
- Roller assembly replacement (sliding door): $185 to $310 installed, including track cleaning and adjustment
- Hinge replacement (hinged or French door): $220 to $420 installed, depending on the hinge spec
- Handle, latch, and lock set replacement: $195 to $380 installed, depending on whether it’s standard or multi-point hardware
- Track repair or replacement: $280 to $540 installed, depending on the length and damage
What drives the range is the door’s series, the condition of surrounding hardware, and whether we’re doing a pure part swap or correcting an underlying alignment issue. Every quote we write in Boca Raton is line-item, so you see exactly what the part costs and exactly what the labor costs before we touch anything. There are no change orders after the fact. The work is backed by our 36500-Day Done Right Promise: if it’s not done right, we come back and make it right.
DIY or Call Us?
You can check a few things yourself before calling. Look at the track for obvious debris or a loose screw. If the door just needs cleaning and lubrication, that’s a reasonable weekend project with the right silicone-based lubricant. Don’t use WD-40 on door rollers; it attracts dust and turns into grinding paste within months in our climate.
Here’s where DIY goes wrong. Adjusting CWS rollers requires getting the door out of the track, and these doors are heavy. A full CWS sliding slab can weigh over 200 pounds. Dropping one will dent the frame, crack the glass, or hurt you. Hinged door spring tension is also something we’d rather you not wrestle with. If the door has to come off its track or the hardware has any spring tension, call us at (561) 816-5648. The estimate is free, and we’re not going to sell you work you don’t need.
FAQs
A quality CWS roller assembly in Boca Raton typically lasts 8 to 12 years before the salt air takes a measurable toll. That’s 2 to 4 years shorter than the same part lasts in non-coastal Florida, which is why we recommend a track and hardware inspection every couple of years. If your door is over a decade old and the parts are original, you’re on borrowed time. Call (561) 816-5648 and we’ll tell you honestly where your door stands.
Sometimes. Roller bearings that are just dry can often be cleaned and re-lubricated, which buys you time, maybe a year or two. But if the wheel is flat-spotted or the bearing is corroded, repair is a losing game; the damaged part will grind down the track and turn a small bill into a bigger one. We’ll show you the part so you can see for yourself, because that’s how we do business in Boca Raton.
Most single-part replacements take 60 to 90 minutes on site once we have the right part in hand. If we’re doing multiple rollers or a track replacement, plan on a half day. We’ll give you a firm timeframe when you call, and we keep it.
We stock the most common CWS-compatible parts on our trucks: rollers, handles, latches, and standard hinges. For unusual series or older doors, we may need to source the part, which usually takes 2 to 4 business days. We’ll tell you before we schedule so there are no surprises. We also carry parts for PGT, CGI, and ES Windows doors, since a lot of Boca Raton homes have more than one brand in the house.
If your CWS door is giving you trouble, don’t wait until it won’t open or close at all. Call (561) 816-5648 for a free estimate. We’re the one down the road, and Ed’s name is on the door, and on every job we do.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.