Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterES Windows Door Installation: The Boca Raton Owner’s Guide
ES Windows door installation in Boca Raton typically runs $450 to $1,200 installed, depending on whether we’re rebuilding the existing frame, replacing rollers and tracks, or hanging a new slab. We keep the most common ES Windows door parts on our trucks, so in many cases we can have your door sliding or closing properly the same day we look at it. What usually brings Boca Raton homeowners to this page is a door that won’t close square, grinds when it moves, or has dropped so badly that light and air pour in around the edges.
Ed Winslow has been installing and repairing ES Windows products in Boca Raton long enough to know that the salt air and afternoon storms do a number on door hardware. We’re an independent service provider, not affiliated with ES Windows, but we’re an authorized installer for their product line and we service what we install, and plenty of doors we didn’t.
Which ES Windows Models This Applies To
ES Windows builds several door lines that show up all over Boca Raton, from waterfront condos in Highland Beach to newer single-family homes in Boca Bridges and Seven Bridges. The parts that fail are rarely unique to one model, but the dimensions matter. ES Windows doors are built to metric specifications, which is the first thing that trips up a homeowner trying to order parts online or from a generic supplier.
The model number is on a label on the door edge or the top rail, and it looks like a series code followed by sizing, something along the lines of a four-digit series identifier. If the label is gone, which happens often on older doors, we measure the panel thickness, the roller diameter, and the track profile to match the part correctly. For ES Windows specifically, OEM parts almost always fit the first time, while aftermarket rollers and tracks can work fine but sometimes need shimming or a track adjustment to sit right. We’ll tell you honestly which way to go based on what failed and what the replacement costs, because sometimes the aftermarket part is just a better value and sometimes it isn’t worth the gamble.
Signs Your ES Windows Door Installation Is Failing
- The door scrapes or drags when you slide it. This usually means the rollers have worn flat or the bearings are shot. In Boca Raton’s humidity, the nylon or steel rollers corrode faster than in drier climates, especially near the water.
- The door drops on one side when fully open or closed. The roller carriers or adjustment screws have stripped, or the track itself has sagged. ES Windows doors are heavy, and once a roller starts to fail, the weight accelerates the damage.
- Air, rain, or insects come in around the edges. The weatherstripping has compressed or torn, and on older ES Windows frames, the seal channel can deform over time. This is a common complaint in Boca Raton during rainy season.
- You have to lift the door to get it to move. That’s a sign the rollers are fully gone and you’re dragging the panel on metal. Every time you do this, the track gets chewed up a little more, and that can turn a $450 repair into a full track replacement.
- The door doesn’t lock or latch properly anymore. When the panel sags even a quarter inch, the lock point and strike plate stop aligning. It’s not laziness on your part, it’s geometry. The fix is addressing the sag, not forcing the lock.
Replacement Cost & What’s Included
In Boca Raton, you should expect the following installed price ranges for ES Windows door work:
- Roller replacement (pair of rollers + labor): $180 to $320
- Track repair or replacement: $250 to $500
- Weatherstripping and seal replacement: $150 to $300
- Full door rehanging and adjustment: $300 to $600
- New ES Windows door slab installation: $1,200 to $3,500 depending on size and glass package
Every quote is line-itemed before we start, so you’ll see parts and labor separated and know exactly what you’re paying for. The price we quote is the price you pay, no change orders unless you ask us to do additional work while we’re there. Our workmanship is covered by the 36500-Day Done Right Promise: if it’s not done right, we make it right. That’s Ed’s word, and it’s been that way since 2011.
Remember the standing offers too: $40 off any repair over $200, a free second opinion on any written estimate you’ve gotten from another company, no trip charge for Boca Raton service calls, and a permanent 10% discount for seniors and veterans.
DIY or Call Us?
If you want to check a few things yourself first, go ahead. You can clean out the track with a brush and a shop vac, look for loose screws on the handle and lock hardware, and check whether the door is visibly sitting lower on one side. Those are safe, useful observations that help us diagnose over the phone.
What you should not do is try to pull an ES Windows door panel out of the frame by yourself. These panels are heavy, often 150 to 250 pounds, and once a panel comes off the track, it wants to tip, and a human arm or foot is a poor substitute for a proper lifting rig. We’ve seen homeowners wrench their backs, crush fingers, and crack glass panels trying to save a service call. If the door is dragging, binding, or off-track, call us at (561) 816-5648 and let a crew that does this every week handle it. The estimate is free.
FAQs
Plan on 8 to 12 years for rollers and 10 to 15 years for tracks, with doors near salt water on the low end of that range. Boca Raton’s heat, humidity, and salt air corrode hardware faster than inland locations. If your door is older than a decade and starting to drag, the rollers are done. Call (561) 816-5648 and we’ll confirm it in person.
Yes, in most cases. The majority of the doors we see in Boca Raton need rollers, tracks, seals, or a full rehang, not a new door. A full replacement only makes sense if the glass is broken, the frame is rotted or bent, or you want to upgrade to a different glass package. We’ll tell you straight which way to go, and we won’t sell you a door you don’t need.
A roller or track replacement on an ES Windows door takes 1 to 2 hours in most cases. A full new slab installation is typically a half-day job. We come prepared with common parts on the truck, so you’re not waiting on a second trip.
We stock the most common ES Windows rollers, tracks, seals, and lock hardware on our service trucks. If your door needs something we don’t carry, we’ll source it directly and schedule the install once it arrives. You’ll know the exact timeline before we start, and the pricing doesn’t change between the quote and the job.
When your ES Windows door isn’t working right, the fix is usually faster and cheaper than you think. Call Winslow Windows & Doors at (561) 816-5648 for a free estimate. A live person answers, day or night, and Ed’s name is on the truck, so the work has to be right. The one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.