Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterHorizontal Roller & Sliding Windows in Boca Raton, FL | Winslow Windows & Doors
Horizontal roller and sliding windows give Boca Raton homeowners wide sightlines, easy ventilation, and the impact protection Florida’s building code demands. Our workhorse impact profile pairs laminated impact glass, tested to withstand 140-mph winds and 9,500 lbs of wind-borne debris impact, with a reinforced track that glides open without binding. At Winslow Windows & Doors, we install these systems across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and we’ve been doing it long enough to know what coastal air, salt spray, and HVHZ permitting require. If you’re researching replacement windows in Boca Raton, call (561) 816-5648 for a free on-site measurement and a line-item quote.
Product Overview - Horizontal Roller & Sliding Windows
Ask any Boca Raton homeowner what they want from a window and the answer usually lands on light, airflow, and not having to wrestle with a sash. Horizontal roller windows deliver all three. The sash travels side to side on a track, which means no hinged panel swinging into a walkway, no counterweight in the wall, and no sag over time when the frame is engineered correctly. For ranch homes in Boca Square or contemporary builds in Royal Palm Yacht & Country Club, the clean horizontal line reads comfortable and uncluttered from both inside and out.
What separates a Florida-spec horizontal roller window from what you’d find in, say, Ohio, is the glass pack and the track. We spec laminated impact glass with a PVB interlayer that holds the pane in the frame even when a 2×4 hits it at 34 mph, which is exactly what the TAS 201 large-missile test simulates. The track itself is reinforced to carry that weight without flexing. Frame material comes down to preference and budget: aluminum gives you slimmer profiles and a crisper edge, vinyl brings thermal performance and a softer price point. Both can be built to the same impact standard, and both get installed the same way: level, plumb, square, and sealed. In Boca Raton, where the wind conversation is always present from June through November, that matters more than most homeowners realize until the first named storm shows up on the radar.
These windows aren’t a specialty product. They’re the everyday window of South Florida, just built to the standard this coast actually requires. Call (561) 816-5648 and we’ll help you sort through the configurations that fit your openings.
Technical Specifications
Every horizontal roller window we quote is configured to your specific openings and your structure’s design pressure. Here’s the full menu for this profile:
- Frame materials: Extruded aluminum or multi-chambered vinyl, both available in impact-rated configurations.
- Track configurations: Two-track (one fixed panel, one sliding) or three-track (three sashes, two of which operate, ideal for wide openings).
- Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass for thermal performance, tinted glass, or clear glass.
- Finish options: White, almond, bronze, black, and tan. Finish availability varies by manufacturer line.
- Screen options: Retractable screen or standard sliding screen, both matched to the frame color.
- Design pressure: Matched to your wind zone, up to +/-100, never higher. We don’t oversell pressure ratings you don’t need and won’t pay for.
- Compliance: Miami-Dade NOA and Florida Product Approval numbers issued per configuration, engineered to Florida Building Code High-Velocity Hurricane Zone requirements. We provide the exact approval on your quote.
Hurricane & Compliance Performance
Laminated Impact Glass
The glass pack uses a PVB interlayer bonded between two panes. Under impact the glass may crack but stays in the frame, keeping the building envelope sealed against wind-driven rain and pressure changes. That’s the entire point in a storm.
Miami-Dade NOA / Florida Product Approval
Every configuration of this window carries a Miami-Dade Notice of Acceptance and a Florida Product Approval number. We list the exact approval on your written quote so your permit application is complete before the inspector looks at it.
FBC / HVHZ Compliance
These windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. The FBC-HVHZ applies to Miami-Dade and Broward counties, and the product is built for that standard, not a watered-down version of it.
TAS 201 / 202 / 203 Testing Context
The HVHZ protocol family includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. This window is tested under that protocol family. That’s the standard your local building department recognizes.
Design Pressure for Your Wind Zone
Design pressure is matched to the wind load your specific wall experiences. Up to +/-100 PSF, never higher. We size the product to your opening and your exposure category rather than selling a number that looks impressive on paper but doesn’t fit your house.
Energy Performance
Low-E insulated glass options are available for homeowners who want thermal performance alongside impact protection. A Low-E coating cuts heat gain through the glass, which matters when your west-facing windows get palm-shaded afternoons but no relief from July sun.
Color & Glass Options
Boca Raton architecture runs from crisp white Mediterranean to deep bronze modern, and the right window finish anchors the exterior palette. White and almond are the workhorses: clean on stucco, forgiving with white trim, and bright against barrel tile. Bronze and black read more contemporary and work well on homes with dark fascia or modern landscaping. Tan splits the difference, softening the contrast on earth-toned exteriors common in the older sections of Boca Raton like the neighborhoods along Camino Real.
Glass selection depends on what the window faces. Clear laminated impact glass is the straightforward choice everywhere. Tinted glass helps on unshaded eastern and western exposures where morning and afternoon sun get aggressive. Low-E insulated glass is the pick for bedrooms and living areas where your AC runs longest and you want the glass doing double duty. For a sliding window that faces the pool with no overhang, Low-E plus tint is often the right combination. We’ll walk you through it based on the actual orientation of your walls, not a generic chart.
Installation by Winslow Windows & Doors in Boca Raton
A window can carry a valid Miami-Dade NOA and still fail if it’s set wrong. The approval testing assumes the frame is anchored properly, shimmed correctly, and sealed so that the wall assembly keeps water where it belongs. That’s why installation practice matters as much as product selection, and why we install to AAMA 2400/2410 standard practice, using AAMA 812 low-expansion foam around the full perimeter. The window itself gets set level, plumb, and square, with the reveal checked before anchoring. The track is never flexed to chase the opening. Drainage paths are left clear. The finish is a water test on the new opening, and nothing gets caulked over to hide a problem.
In Boca Raton, two things shape the install more than most homeowners expect. First is coastal exposure: homes east of the Intracoastal sit in a tougher wind zone and in salt air, which means stainless hardware and proper sealant selection from day one. Second is permitting: Boca Raton’s building department reviews window replacement under the HVHZ code, and part of our job is making sure the NOA and Florida Product Approval numbers on your permit package match the exact size and configuration installed. Improper installation compromises the very system you paid for. Get it set by a crew that does this specific window, in this specific city, every week. We’ve been serving Boca Raton since the day this company hung its first sign.
Frequently Asked Questions - Horizontal Roller & Sliding Windows
Design pressure is matched to your specific wind zone, up to +/-100 PSF, and never higher. The window is tested to withstand 140-mph winds and 9,500 lbs of wind-borne debris impact. We confirm the exact design pressure for your wall, your exposure category, and your opening size when we measure, then put it on your written quote.
Lead time varies by manufacturer line and finish. PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass each have their own production schedule, and during peak season that schedule stretches. We give you a production timeline in writing once your order is placed, and we coordinate install around it. Call (561) 816-5648 and we’ll tell you where the lines sit right now.
Yes. Your Boca Raton permit package will require the NOA and Florida Product Approval numbers matching the exact product, size, and configuration being installed. We include those approval documents with your quote so you aren’t chasing paperwork at permit time.
Most sizes can be configured within the manufacturer’s approved dimensional range. Track layout, glass package, finish, and screen choice are all flexible. The approval number is tied to the specific configuration, so we quote the approval along with the product rather than approximating. Custom mulling and joined configurations get detailed on the same written quote.
Keep the track clear of sand and debris, especially after storms or beach days, and wipe it down periodically with a damp cloth. The rollers are designed to run without oil, but salt air in a coastal Boca Raton setting means an annual rinse of the lower track keeps grit from grinding into the finish. If a door or window starts to drag, call us before forcing it; a simple roller adjustment beats a track replacement.
Get a Quote - Horizontal Roller & Sliding Windows in Boca Raton
We’ll measure every opening, match design pressure to your wind zone, and confirm the NOA and Florida Product Approval numbers on your exact configuration before you sign anything. The quote is free, it’s line-item, and it comes with the phone number of a real person who knows this product. Call Winslow Windows & Doors at (561) 816-5648 to schedule your free on-site measurement in Boca Raton, FL.
Written by the team at Winslow Windows & Doors, serving Boca Raton, FL with hurricane-impact windows and doors.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
Detailed Images
