CGI Impact Garage Doors Nationwide | Winslow Windows & Doors

CGI Impact Garage Doors: The Boca Raton Owner’s Guide

If your CGI impact garage door has a failed spring, torn hinge, snapped cable, or dead opener, you’re looking at a repair bill between $180 and $1,400 in Boca Raton depending on the part. We stock the most common CGI-compatible hardware on our trucks and can usually have a technician at your door the same day you call. Most homeowners discover the failure the hard way: the door won’t lift, sags on one side, or makes a sound like a gunshot when a spring lets go. If you’re reading this, you probably heard something you wish you hadn’t.

Call (561) 816-5648

We’re Winslow Windows & Doors, and we’ve been repairing and installing impact-rated garage doors across Boca Raton for years. We’re an independent service provider, not affiliated with CGI. Frankly, that works in your favor: we’ll tell you if a genuine OEM part matters for your situation, or if a quality aftermarket equivalent will perform identically for less money. Either way, the price is upfront, the work is guaranteed, and Ed Winslow’s name is attached to it.

Which CGI Models This Applies To

CGI impact garage doors come in three main lines you’ll find throughout Boca Raton: the Estate Collection, the Classic Collection, and the Sentry Collection. The Estate line uses heavier gauge aluminum and thicker laminated glass panels than the Classic, which matters when you’re matching replacement panels so the weight distribution stays balanced. If your builder installed a Classic series door and a contractor swaps in an Estate panel, the spring tension will be wrong and the opener will work itself to death within a year.

You can identify your model by the metal ID tag riveted to the interior of the left or right door jamb. It lists the series name, the panel width (usually 16 or 18 feet), and the wind-load rating. South Florida code requires impact-rated doors to carry a Florida Building Code approval number, and CGI’s typically start with “FL” followed by five digits. If the tag is missing or unreadable, measure the door and take photos of the end stiles: CGI panels have a distinct extruded profile that we recognize on sight. On hardware like hinges, rollers, and seals, we often recommend quality aftermarket parts that meet or exceed the original spec. For springs and cables, we stay with OEM or exact-match equivalents: the tension math depends on precise gauge and coil count, and CGI doors are unforgiving when the spring rate is even slightly off.

Signs Your CGI Impact Garage Door Is Failing

• The door opens a few inches, then stops or reverses. That’s usually a worn torsion spring losing tension, or a failing safety sensor misreading the floor. Springs on Boca Raton doors average 10,000 cycles; most builders install 10,000-cycle springs, so a 15-year-old door is living on borrowed time.
• A loud bang from the garage, like a backfire. That’s a torsion spring snapping. It’s not subtle, and it’s dangerous. When a spring under full tension fails, the released energy can send cable ends and mounting brackets flying. Don’t stand near it. Call us.
• The door sags on one side or scrapes against the track. This usually means one spring has failed while the other is still carrying the load. Continuing to use the opener in this condition bends the track and warps the panel hinges, turning a $200 spring job into a $600 hardware replacement.
• You hear grinding or squealing when the door moves. Rollers wear out in coastal Florida faster than anywhere else: salt air and humidity eat the bearings on even sealed units. If it sounds like gravel, the roller’s done. If it sounds like metal-on-metal scraping, you may have a broken roller mount rubbing the track.
• The door won’t stay down, or leaves a gap at the bottom. That’s typically a broken cable or a stretched one. On impact doors, the bottom seal also compresses over time, and a gap means water intrusion during Boca Raton thunderstorms. In some neighborhoods near the Intracoastal, we see seal degradation in as little as three years.

Replacement Cost & What’s Included

Here’s what CGI impact garage door repair costs in Boca Raton, parts and labor included:

• Single torsion spring replacement: $180 to $340 installed, depending on spring cycle rating and door weight.
• Both springs (recommended if one has failed): $320 to $600 installed. Pairing new springs prevents uneven door balance.
• Cable replacement (per side): $140 to $260 installed. Cables fail when springs fail; we always inspect both.
• Roller replacement (all rollers, nylon or steel): $120 to $250 installed, depending on roller grade.
• Hinge replacement (per hinge): $45 to $110 installed, depending on gauge and position.
• Impact-rated panel replacement (single panel): $500 to $1,400 installed, depending on series and glass package.
• Opener replacement (impact-door compatible): $450 to $900 installed, including programming and safety sensor calibration.

Every quote we give in Boca Raton is a written line-item price. Your parts are listed separately from the labor so you see exactly what you’re paying for, and the price does not change once the job starts unless we find something we genuinely could not have known about behind the drywall. We pull permits when the scope requires them, and every repair carries our standard workmanship warranty. Ed Winslow’s 36500-Day Done Right Promise covers every single job we perform.

DIY or Call Us?

Let’s be honest about what a homeowner can safely do. You can visually inspect your CGI door: look at the cables for fraying, check the rollers for wobble, and test the balance by disconnecting the opener and lifting the door manually to hip height. If it stays put, the springs are roughly balanced. If it drops, they’re not. Routine lubrication of hinges and rollers with a silicone spray is fine, and you can replace a worn bottom seal yourself if you’re patient with the track groove.

What you should not do is touch the torsion springs, cables, or anything attached to them. These are under hundreds of pounds of tension, and when they release, they don’t give you a second chance. I learned this the hard way in Miami, early in my career, watching a guy take a bracket to the forearm because he thought he could “just back off the tension a little.” My name’s on the truck, so the work has to be right. Call us at (561) 816-5648 and we’ll do it safely, with the right tools, and with a warranty behind it.

How Much Does CGI Garage Door Repair Cost in Boca Raton?

Will the Price Change Once Work Starts?

No. The quote we give you is the price you pay, unless we uncover a hidden condition inside the wall or above the header that no one could have seen beforehand. Even then, we stop and get your approval in writing before touching anything. That’s not a sales tactic; it’s how we’ve operated in Boca Raton since 2011.

What’s the Lifespan of CGI Impact Garage Door Parts?

In Boca Raton’s salt air and humidity, we generally see torsion springs last 7 to 10 years on a daily-use door, rollers 5 to 8 years, cables 8 to 12 years, and hinges 10 to 15 years. Homes east of Dixie Highway or within a mile of the Intracoastal tend to see those numbers drop by 20 to 30 percent. If your door is over a decade old, a proactive hardware refresh is cheaper than an emergency repair at 11 p.m. Call (561) 816-5648 and we’ll give you an honest assessment of what’s worn and what’s fine. The second opinion is free.

FAQs