Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterECO Window Systems Roof Repair in Boca Raton: What to Know First
ECO Window Systems roof repair in Boca Raton usually runs between $350 and $950 for most skylight flashing, curb seal, and roof-to-window transition failures, and we complete most jobs in a single visit. We’re an independent ECO Window Systems service provider, which means we fix the product honestly without being tied to a manufacturer’s script. This page is for Boca Raton homeowners whose ECO Window Systems skylights, roof windows, or roof-to-glass transitions are leaking, fogging, or showing water stains after a storm. If that’s you, call us at (561) 816-5648 and we’ll walk you through what you’re likely dealing with before we ever schedule the truck.
How ECO Window Systems Products Fail - and How We Fix Them
After years of working on ECO Window Systems installs across Boca Raton, we’ve learned exactly where these units fail in our climate. The salt air, afternoon thunderstorms, and brutal UV exposure between June and October create very specific failure patterns. Here’s what we see most often:
- ECO Skylight curb seal separation (fixed skylights). Most commonly on the E-Series and T-Series fixed skylights installed on flat and low-slope Boca Raton roofs. The factory sealant between the aluminum extrusion frame and the roof curb degrades under relentless UV and salt spray, and the first sign is a faint rust-orange drip stain down an interior wall. We strip the old sealant, clean the curb mechanically, and re-bed the frame with a marine-grade polyurethane made for South Florida humidity. The skylight itself is usually fine; the seal is what gives up.
- Venting skylight chain and rail corrosion (V-Series operable units). Boca Raton’s salt breezes corrode the bronze and zinc hardware on ECO venting skylights faster than any climate we’ve worked in. The chain sticks, the rail binds, and eventually the unit won’t close tight. Rain then drips in through the half-inch gap the owner can’t see. We replace the hardware with corrosion-resistant aftermarket parts and re-tension the mechanism. It costs a fraction of replacing the whole window.
- Roof-to-window flashing pulls loose on ECO window walls. When an ECO fixed glass window wall meets a tile roof, the original step flashing often gets bent by wind-driven rain and thermal expansion. The telltale is a small pile of granules at the base of the window inside, after heavy storms. We cut new lead or galvanized step flashing, set it under the existing tile course, and seal the transition with a flexible polyurethane that moves with the roof deck.
- Insulated glass unit (IGU) failure in roof-mounted ECO units. Roof-mounted glass takes a beating from the sun, and ECO IGUs installed in the 2004-2012 era were prone to edge seal fatigue in this placement. Fog between the panes is the obvious sign. If the frame is intact, we replace the IGU with a new argon-filled unit matched to the original glass spec, which keeps the thermal performance intact without replacing the whole frame. It’s worth noting that an IGU swap on a roof window is a two-person job; the glass is heavy and awkward at that angle.
- Weep hole blockage causing ponding on flat-roof ECO curbs. On Boca Raton’s flat-roof sections, leaves, shingle grit, and salt crust clog the small drain channels built into ECO skylight frames. Water ponds against the glass instead of draining, and capillary action pulls it inside. We clean the channels, verify the curb height meets code for the roof’s pitch, and add a subtle slope correction if needed. Simple fix, but the diagnosis requires knowing these units drain from the sides, not the front.
Our ECO Window Systems Roof Repair Process
When you call us about an ECO Window Systems roof issue in Boca Raton, here’s exactly what happens:
- 1
You call (561) 816-5648 and a live person answers. You’ll describe the symptom; we’ll ask a few pointed questions about the age of the unit, the roof type, and when you first noticed the leak. No call center, no ticket number.
- 2
We schedule the diagnostic visit. Inside our home county there’s no trip charge. A background-checked, uniformed tech arrives with a moisture meter and infrared camera to trace the leak’s true point of entry. On ECO roof units, the entry point is rarely where the stain shows.
- 3
We show you the problem and price the repair. We’ll point out exactly what failed, why it failed in this climate, and what the fix costs. You’ll get a written line-item estimate. If you want a second opinion on any written estimate you’ve gotten from another company, bring it out; we’ll review it free.
- 4
We do the repair the warranty-safe way. We use OEM ECO parts when they matter for the unit’s structural or thermal warranty, and corrosion-resistant aftermarket hardware where the original parts failed prematurely. We never patch a leak; we fix the source.
- 5
We water-test the repair. We run a controlled hose test over the repaired area, check the interior with the moisture meter again, and verify the unit opens and closes cleanly if it’s operable.
- 6
We walk you through what we did and why, then leave the site clean. If anything’s not right, the 36500-Day Done Right Promise means we come back. Ed’s name is on the door, and on every job we do.
What ECO Window Systems Roof Repair Costs in Boca Raton
Here’s what Boca Raton homeowners typically pay for ECO Window Systems roof repairs with us:
- Skylight curb re-bedding (fixed E-Series or T-Series): $375-$650, depending on curb condition and access.
- Venting skylight hardware replacement and re-tension (V-Series): $200-$425 for parts and labor.
- Roof-to-window step flashing replacement: $450-$950, driven by roof type (tile is more labor-intensive than shingle) and how much flashing needs replacing.
- IGU replacement in a roof-mounted ECO unit: $500-$1,100 depending on glass size and whether we can reuse the existing frame.
- Weep hole and drain channel clearing: $150-$300, including curb height verification.
What moves the price is roof pitch and access. A two-story tile roof in Broken Sound costs more to work on safely than a single-story flat roof over a carport. You’ll know your exact number before any work starts. Call (561) 816-5648 for a free estimate.
Why Boca Raton Homeowners Call Winslow Windows & Doors for ECO Window Systems Work
We’ve been fixing roofs and installing windows and doors across Boca Raton since 2011, locally owned by Ed Winslow with a published address and license number. We’re an independent ECO Window Systems service provider, which means we’re not obligated to sell you a replacement unit when a repair is the honest call. Our techs are background-checked and uniformed, and they know ECO units the way a mechanic knows a specific engine, not just the general category of engine. When an ECO unit is beyond repair and a roof opening needs a different product, we’re also authorized for PGT, CGI, CWS, and ES Windows, so you’ll get a straight recommendation rather than a sales pivot. The 36500-Day Done Right Promise covers every ECO repair we perform. If it’s not right, we make it right.
FAQs
No. As an independent ECO Window Systems service provider, we follow OEM specifications for sealant types, fastener placement, and flashing details specifically to keep your remaining warranty intact. If a component is under active ECO warranty, we’ll tell you before we touch it and let you decide whether to pursue a warranty claim first. Call (561) 816-5648 if you’re not sure where you stand.
Both, depending on what failed. For structural components like frame extrusions, cladding, and gaskets that hold an ECO warranty, we use OEM parts. For hardware that has corroded prematurely in Boca Raton’s salt air, like V-Series chains and rails, we use marine-grade aftermarket parts that outlast the originals. You’ll know exactly which is which before we start.
Most curb seal, flashing, and hardware repairs are completed the same day we diagnose them, because our trucks carry the sealants, flashing materials, and common ECO hardware for this market. IGU replacements take 3 to 7 days because the glass has to be ordered to the exact size and spec. When we give you a time estimate, it will be realistic, not reassuring.
If the frame is solid and the failure is at the seal, hardware, or glass unit, repair usually makes sense, often for under a thousand dollars. If the aluminum extrusion is corroded through or the curb itself has rotted, the repair won’t hold and you’ll pay twice. We’ll give you both numbers and tell you which we’d choose on our own house. Estimates are free at (561) 816-5648.
No. We use fixed, written line-item pricing. If we find something unexpected hidden behind the flashing, we stop, show you, and get your sign-off before we do anything that costs another dollar. No change orders surprise. That’s the point of upfront pricing.
Need ECO Window Systems Roof Repair in Boca Raton?
If you’ve got a leak, fogged glass, or a skylight that won’t close, call Winslow Windows & Doors at (561) 816-5648. You’ll get a live person on the phone, a straight answer about what you’re probably dealing with, and a free estimate before any work begins. We’re the one down the road, and we answer when you call.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Boca Raton and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.