Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
AfterCGI Windows & Doors in Deerfield Beach, FL | Winslow Windows & Doors
We provide independent CGI window and door service across Deerfield Beach, from A1A condos to the Cove and the single-family neighborhoods west of I-95. What makes our CGI work here different is simple: we know this city’s HVHZ code requirements and Century Village’s board approval process cold, so your job doesn’t stall mid-install. We service and replace CGI Sentinel Series, Estate Collection, 800 Series, and Targa Series products using OEM components whenever the frame is still sound. Call (561) 816-5648 for a free estimate from a crew that’s been doing this in Deerfield Beach for years, not weeks.
Why Deerfield Beach Residents Choose Us for CGI Service
Ed Winslow grew up in Miami and studied building construction technology at Miami Dade College before spending nearly two decades doing windows and doors the hard way, one job at a time. That background matters here because Deerfield Beach sits inside Florida’s High Velocity Hurricane Zone, and the products that pass muster in Boca or Coconut Creek don’t always cut it a mile from the Atlantic. We’re an independent CGI service provider, not manufacturer-affiliated, which means we recommend what’s actually right for your unit, not what a corporate quota says to push. Our techs are background-checked, arrive in uniform, and know the difference between a CGI Sentinel Series corner weld crack and a simple weatherstripping gap. Ed’s name is on the door, and on every job we do.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Deerfield Beach since 2011.
Common CGI Windows & Doors Problems We Solve in Deerfield Beach
Here’s what we see most often in Deerfield Beach, and why it happens here specifically:
- Salt-air pitting on Estate Collection frames. Older CGI Estate Collection aluminum single-hungs on A1A oceanfront condos start pitting and flaking within 10 to 12 years. The powder coating breaks down under daily salt spray, exposing the raw aluminum, which then corrodes and seizes the sash channels. By the time a homeowner notices the window won’t open, the frame underneath is usually pockmarked.
- Corner weld cracks on Sentinel Series impact windows. We regularly find hairline cracks at the inner frame’s corner welds on CGI Sentinel Series units in Deerfield Beach. South Florida’s HVHZ pressure cycling is brutal on welded corners, and once air and water start sneaking in around the glass edge, the window’s impact rating is compromised even if the pane itself looks fine.
- Binding rollers on Targa Series sliding doors. In Century Village units especially, CGI Targa Series sliding glass doors develop uneven roller wear because the original aluminum tracks have corroded from decades of humid, salty air. The door starts to bind, then derails from the bottom track entirely. We pull OEM roller assemblies and replace the track when the frame is still square.
- Blocked weep holes on 1990s horizontal rollers. CGI 800 Series horizontal roller windows installed in Deerfield Beach in the nineties have a recurring problem: weep holes clog with salt and sand, water ponds inside the frame, and it wicks into the drywall below the sill. By the time you see the water stain, the frame channel is usually full of grit.
- Corroded hardware on beachside units. Locks, hinges, and keepers on CGI windows and doors within a mile or two of the ocean fail far faster in Deerfield Beach than in inland Broward cities. Stainless replacement hardware is what we recommend for anything on A1A; the original zinc and coated steel components just don’t hold up.
CGI Service in Deerfield Beach: What Local Conditions Mean for Your Equipment
Deerfield Beach is one of only two regions in Florida (the other being Miami-Dade County) where every replacement window and door must carry a Miami-Dade Notice of Acceptance, the strictest product standard in the nation. What that means for CGI owners here: you cannot simply swap in a product approved for the rest of Florida, and you cannot reuse an older non-NOA-listed unit if your condo board inspects. We see this play out constantly in Century Village, where the association requires every window and door replacement to match the community’s approved product schedule and pass board review before installation can begin. Contractors who don’t know to pull the master permit authorization, or who show up with a product not on the approved schedule, get their work stopped mid-job. We walk in with that paperwork already handled.
Here’s one real example from our work in Deerfield Beach. Our tech pulled a corroded CGI 800 Series horizontal roller from an oceanfront unit on A1A just north of Hillsboro Boulevard, where salt spray had seized the rollers and pitted the bottom track. Because the owner’s condo board required an HVHZ NoA on file, we swapped the entire frame for a current Impact Windows - Deerfield Beach CGI Sentinel Series unit with stainless hardware, and the board signed off the same day without a work-stop order. That’s the difference between knowing Deerfield Beach and just working in it.
CGI Models & Products We Service in Deerfield Beach
We service and replace the full CGI lineup you’ll find in Deerfield Beach homes and condos: Sentinel Series impact windows, Estate Collection aluminum single-hungs, 800 Series horizontal rollers, and Targa Series sliding glass doors. Our parts approach is straightforward: we pull OEM CGI components like roller assemblies, locking handles, and weatherstripping whenever the frame is still square and the glass is intact. After years of salt-air hardening, we recommend full replacement only when the frame itself is pitted beyond repair or the unit predates current HVHZ NoA listings and won’t pass a condo board inspection. We keep common OEM parts stocked locally so Deerfield Beach service doesn’t wait on a warehouse in another state.
CGI Service Pricing in Deerfield Beach
CGI service pricing in Deerfield Beach depends on what’s actually wrong. A roller replacement on a Targa Series door typically runs $180 to $340 including the part and labor. Replacing a corroded locking handle or weatherstripping falls in the $95 to $225 range per unit. A full-frame CGI Sentinel Series impact window replacement generally starts around $1,150 and can reach $2,400 depending on size, glass package, and whether the opening is on a high floor that requires lift access. What drives cost most: whether you need a full frame replacement versus a component swap, your building’s elevation, and whether your condo association requires specific glass tints or hardware finishes. Your free estimate from us covers all of that in writing, no change orders after the fact. Call (561) 816-5648 for exact numbers on your unit.
Serving Deerfield Beach, FL - Our Local Coverage Area
We’re based in the Deerfield Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Deerfield Beach
Yes, in most cases. When a board says a window isn’t on the approved list, the issue is usually that the specific CGI model or glass package doesn’t match the association’s current schedule. We review the board’s approved product list first, then spec a CGI unit that matches it, and we submit the master permit authorization before any work begins. That’s how we avoid the mid-job stop orders that happen when someone shows up with the wrong product. Call (561) 816-5648 and we’ll check your board’s list before you spend another day on hold with the association office.
Salt-air corrosion is the answer. Deerfield Beach condos within a mile or two of the ocean get daily salt spray, and powder-coated aluminum will start to pit within 10 to 12 years on oceanfront buildings. The coating micro-fractures, salt gets underneath, and the metal oxidizes. Once pitting starts, the frame will continue to degrade, and cleaning or repainting won’t stop it. The long-term fix for A1A units is a current-model CGI frame with upgraded corrosion-resistant hardware, which we install with the proper HVHZ NoA documentation.
It depends on the condition of the existing frame and your condo’s rules. If the current frame is still square, not pitted, and the opening is a standard size, we can often handle Deerfield Beach Window Installation as a CGI insert inside the existing frame. But if the frame has salt corrosion, or if your building requires a specific NOA listing that only applies to a full-frame installation, we’ll need to pull the old frame and set the new one properly. We’ll tell you which is which after looking at your unit, and we won’t sell you a full-frame job if an insert will actually work.
Yes. Deerfield Beach sits entirely within the HVHZ, which means every permitted window or door replacement, impact or not, must carry a Miami-Dade Notice of Acceptance. There’s no grace period and no exemption for non-impact products. If your building’s existing non-impact CGI unit is being replaced, the new unit still has to meet current NOA standards. We pull that paperwork on every Deerfield Beach job so your replacement passes inspection the first time.
Usually it’s just the rollers, not the frame. We replace with OEM CGI roller assemblies when the bottom track is still intact, which fixes the binding and the derailment. If the track itself has pitted and gouged from corrosion, that’s a more involved repair that may require a new track or frame section. The best way to know is to have us look at it. Roller-only replacement on a CGI Targa or 800 Series door in Deerfield Beach typically runs $180 to $340. Call (561) 816-5648 for a free estimate, and we’ll tell you exactly what’s worn and what isn’t.
Service Areas Near Deerfield Beach
We serve Deerfield Beach and the surrounding communities, including Boca Raton, Delray Beach, Highland Beach, Boynton Beach, and Coconut Creek. If you own a CGI product in any of these areas, we can typically be there the same week. For CGI service in Boca Raton, including the Broken Sound area, call us directly. For CGI service in Delray Beach, from the beach to the inland neighborhoods, we cover that too. And for more about our broader Deerfield Beach service area, see the full coverage map. Our CGI sales & service page has details on every model line we handle.
Book Your CGI Service in Deerfield Beach Today
Call (561) 816-5648 and you’ll reach a real person, not a voicemail loop. We’ll schedule a time that works for you, send a background-checked tech in uniform, and give you a written line-item quote before any work starts. Free estimates, free second opinions on written estimates, and $40 off any repair over $200. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Deerfield Beach since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.